Entry Door Replacement in Fort Myers, FL

Craftsman-style impact-rated entry door with sidelights on a Fort Myers home

Your front entry door is the first opening most visitors and inspectors notice, and on most Fort Myers homes it also has to meet the same wind-load and impact standards as every other opening on the structure. Entry door replacement means swapping the old slab and frame for a complete, tested impact-rated assembly — fiberglass or steel slab, reinforced frame, and multi-point locking hardware, engineered together and rated to the required design pressure.

We replace worn, warped, or non-compliant entry doors across Fort Myers and Lee County, with or without sidelites and transoms, in a range of styles and glass-insert designs so the upgrade doesn't mean sacrificing curb appeal. Every replacement is measured and rated to the specific opening's requirements before we order product.

An impact-rated entry door also adds a real security benefit, since the same reinforced frame and laminated glass that resist storm debris resist forced entry, and it's one more feature credited on a wind mitigation insurance inspection. Call for a free quote.

📞 Call (888) 619-5502

Request This Service

* Indicates required field

Other Services

Fiberglass vs. Steel Entry Slabs

Fiberglass entry doors resist dents, don't rust, and hold paint and stain finishes well in our humidity, making them the more popular choice for Southwest Florida homes, particularly near the coast where salt air accelerates corrosion on metal. Steel doors cost less and offer excellent security, but are more prone to denting and, on older or lower-grade units, rust at the edges over time in humid coastal air. We'll walk you through both based on your budget and where your home sits relative to the coast.

Sidelites, Transoms & Glass Inserts

Many Fort Myers entries include sidelites (narrow glass panels flanking the door) or a transom above it, and all of that glass has to be impact-rated as part of the assembly, not just the door slab itself. We design entry packages that include the sidelites and transom in the same rated system, and offer a range of decorative glass-insert styles for the door itself so the finished look is still distinctly yours.

Installation Process

We remove the old door, frame, and any sidelite or transom units down to the rough opening, confirm the opening is square and the structure sound, then set the new frame and fasten it per the manufacturer's engineered schedule. We install and adjust the multi-point locking hardware, seal the frame perimeter against water intrusion, and finish trim to match your entry. Most single-door replacements are completed in a day.

Code Compliance for Entry Openings

Entry doors in Lee County's windborne-debris region need a Florida Product Approval or Miami-Dade NOA rated to the calculated design pressure for that opening, which we determine based on your home's height and exposure. If your entry includes sidelites or a transom, those glass elements need matching product approval as part of the tested assembly — not as a separate, unrated add-on.

Signs You Need a New Entry Door

Warping, swelling, or a door that no longer latches flush, visible light gaps around the frame, fading or peeling finish from sun exposure, foggy sidelite glass, and rust or corrosion at steel hinges and hardware are all common signs. If your entry door predates a recent renovation or your home still has its original builder-grade door, it's also worth confirming whether it currently meets Florida's impact requirements at all.

What Drives the Cost

Pricing depends on slab material, whether sidelites or a transom are included, glass-insert complexity, hardware grade, and the DP rating required for your opening. A plain single slab replacement runs less than a full entry system with matching sidelites and a transom, so we quote based on your specific entry configuration.

Security & Insurance Benefits

An impact-rated entry door's reinforced frame and laminated glass resist forced entry attempts significantly better than a standard residential door, and it's one of the mitigation features credited on a Florida wind mitigation inspection report, which can contribute to an insurance premium discount alongside your other impact-rated openings.

Weatherproofing the Opening

An entry door faces direct wind-driven rain more than almost any other opening on the home, so proper flashing and sealant detailing around the frame perimeter matters as much as the door itself for preventing water intrusion into the wall cavity. We install a continuous sealant bead and, where the opening calls for it, flashing tape integrated with your home's existing weather-resistive barrier, rather than relying on caulk alone at the frame edge.

Licensing & Permitting Specifics

Entry door replacement requires a permit in Fort Myers and throughout Lee County because it changes a wind-load-rated opening on the exterior envelope, and the building department verifies the installed product's approval documentation against the permit at final inspection. We submit that documentation and schedule the inspection as a standard part of every entry door project, and we can provide our license number and certificate of insurance before any work begins.

Curb Appeal Without Sacrificing Protection

A lot of homeowners worry that upgrading to a code-compliant, impact-rated entry door means giving up the custom look they want, but that's not the tradeoff it used to be. Impact-rated fiberglass and steel slabs are available in a wide range of panel styles, wood-look finishes, and decorative glass-insert designs, from simple frosted lites to elaborate leaded-glass patterns, all built into a tested impact assembly rather than added on afterward. We'll show you real product samples during your quote so you can see the style and finish options before deciding, rather than picking blind off a brochure photo.

How This Differs from a General Impact Door Installation

Entry door replacement is a focused version of our broader impact door installation service, specifically centered on the front-facing door, its frame, and any flanking sidelites or transom — the openings that also carry the most curb-appeal weight on a home. If you're also considering a patio slider, French door, or a secondary side door as part of a larger project, our impact door installation page covers that fuller range, and we're glad to quote both together as one coordinated project.

Entry Door Replacement FAQs

Can I keep my current door hardware or handle set?

In most cases the multi-point locking hardware needs to be the manufacturer-specified system for the door's tested rating, but decorative handle sets and finishes can often be customized — ask us during your quote about your specific hardware preferences.

How long does a single entry door replacement take?

A straightforward single-door replacement without sidelites is typically a one-day job on-site. Adding sidelites, a transom, or structural frame repair can extend that, and we'll give you a realistic timeline once we've seen your entry in person.